External battery 2nd generation 10,000mAh 5V/3A-18W Nitecore

External battery 2nd generation 10,000mAh 5V/3A-18W Nitecore

Specially designed for trail and running where the lightness of the equipment is important, this battery has a Low mode allowing you to recharge small electronic devices such as connected watches or headphones. Its blue indicators allow you to monitor the remaining battery level. Approved for aircraft.

It also allows you to recharge:
> 2 times an iPhone 13 Pro
> 4.2 times a UT27 headlamp
> 1.5 times an NL1835 battery (3500mAh)

Charging indicator / Power level display
During the charging process, the indicators Blue lights flash to indicate power level. The 3 blue lights will stay on constantly when charging is complete.

Short press the Mode button and the blue indicators will light up to show the power level.
> 3 blue indicators lit indicate an approximately 100% charged battery
> 2 blue indicators lit indicate a battery approximately 70% charged
> 1 blue indicator lit indicates a battery approximately 30% charged
> 1 quick flash indicates a low battery, requiring recharging quickly

It should be recharged when the last blue indicator flashes to indicate low power.
The white light indicates access to low mode. It automatically enters the hibernation state when there is no entry or exit for a certain period of time.

Charging an external device
During the discharging process, the blue indicators will be on to indicate the remaining power.

Low Power Mode
This mode is suitable for charging low-current devices, including wireless headphones, wearable devices and more. Press and hold the Mode button to turn on the white indicator and enter low current mode. Press and hold the Mode button again to turn off the white indicator and exit low current mode.
(It is recommended to exit the low current mode after the low current charging process is completed)

Simultaneous input and output
It is available with simultaneous input and output. When charged via the USB-C port, it can charge external devices via the USB-A port.